Home › Audio/Visual/Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > CD cannot be Ejected

for Preparation Click here


INSPECTION PROCEDURE

1.PRESS "EJECT" AND CHECK OPERATION
  1. Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD is ejected.

    OK:
    CD is ejected.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK


2.REPLACE CD WITH ANOTHER AND RECHECK
  1. Insert another CD and check if it can be ejected.

    OK:
    CD can be ejected.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END