Home › Audio/Visual/Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > CD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CD


    I100151
  1. Check the CD.

    OK:
    The CD is clean.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.



NG
CLEAN CD
OK


2.CHECK CD


    I100152
  1. Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD.



NG
CHANGE CD
OK


3.CHECK OPERATION USING ANOTHER CD
  1. Check if the problem recurs using another CD.

    OK:
    The problem does not occur.



NG
Go to step 4
OK

END 

4.CHECK RADIO RECEIVER ASSEMBLY
  1. Check that the radio receiver assembly is properly installed.

    OK:
    Radio receiver assembly is properly installed.



NG
REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY
OK

REPLACE RADIO RECEIVER ASSEMBLY (Click here)