Home › Engine / Hybrid System ยท CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK ECM

A186167E01

  1. Measure the voltage and resistance according to the value(s) in the table below.

    HINT:
    The standard normal voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard normal voltage for that pair of terminals, displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


    Terminal No. (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    A27-16 (TC) - D56-81 (E1)
    R - BR
    Ground
    Ignition switch to ON
    11 to 14 V
    A27-16 (TC) - D56-81 (E1)
    R - BR
    Ground
    Connect terminals TC and CG of DLC3
    Below 1 V
    A27-26 (STP) - D56-81 (E1)
    LG - BR
    Stop light signal
    Ignition switch to ON, Brake pedal depressed
    11 to 14 V
    A27-26 (STP) - D56-81 (E1)
    LG - BR
    Stop light signal
    Ignition switch to ON, Brake pedal released
    Below 1 V
    A27-45 (CCS) - D56-81 (E1)
    BR - BR
    Cruise control main switch circuit
    Ignition switch to ON
    11 to 14 V
    A27-45 (CCS) - D56-81 (E1)
    BR - BR
    Cruise control main switch circuit
    CANCEL switch ON
    6.6 to 10.1 V
    A27-45 (CCS) - D56-81 (E1)
    BR - BR
    Cruise control main switch circuit
    SET/COAST switch ON
    4.5 to 7.1 V
    A27-45 (CCS) - D56-81 (E1)
    BR - BR
    Cruise control main switch circuit
    RES/ACC switch ON
    2.3 to 4.0 V
    A27-45 (CCS) - D56-81 (E1)
    BR - BR
    Cruise control main switch circuit
    MAIN switch ON
    Below 1 V
    A27-35 (ST1-) - D56-81 (E1)
    R - BR
    Stop light signal
    Ignition switch to ON, Brake pedal depressed
    Below 1 V
    A27-35 (ST1-) - D56-81 (E1)
    R - BR
    Stop light signal
    Brake pedal released
    11 to 14 V
    D56-27 (D) - D56-81 (E1)
    G - BR
    D shift position signal
    Ignition switch to ON, shift lever not in D
    Below 1 V
    D56-27 (D) - D56-81 (E1)
    G - BR
    D shift position signal
    Ignition switch to ON, shift lever in D
    11 to 14 V