Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > Current Position Display does not Appear

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK NAVIGATION RECEIVER ASSEMBLY


    E176547
  1. Press the "INFO" switch and then select "Map Data".



    E176548
  1. Check if a disc is inserted into the map disc slot.

    1. Check if the map data version is displayed in the "Map Data" section.

      OK:
      The map data version is displayed.



NG
INSERT MAP DISC INTO MAP SIDE SLOT
OK


2.CHECK MAP DISC


    I100152E12
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks in the map disc



NG
REPLACE MAP DISC
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)