CONDENSER (w/o Air Cooled Transmission Oil Cooler) > REASSEMBLY |
| 1. INSTALL COOLER DRYER |
![]() |
Using pliers, install the cooler dryer onto the modulator.
![]() |
Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.
![]() |
Using a 14 mm straight hexagon wrench, install the cap onto the cooler condenser core.
| 2. INSTALL NO. 2 COOLER CONDENSER CUSHION |
![]() |
Install the 2 cushions to the cooler condenser.
| 3. INSTALL NO. 1 COOLER CONDENSER CUSHION |
![]() |
Install the collar to the cushions.
![]() |
Install the 2 cushions to the cooler condenser.