Home › Engine / Hybrid System ยท CRUISE CONTROL › DYNAMIC LASER CRUISE CONTROL SYSTEM

DTC    P1575    Warning Buzzer Malfunction

for Preparation Click here


DESCRIPTION

The skid control ECU receives an alarm demand signal from the ECM and operates the skid control buzzer. The buzzer sounds to warn that the distance between the vehicle in front and your own vehicle is decreasing.

DTC No.
DTC Detection Condition
Trouble Area
P1575
The ECM receives a buzzer abnormal signal for 0.2 seconds or more while the dynamic laser cruise control is in operation
  1. Skid control buzzer
  2. Skid control buzzer circuit
  3. Skid control ECU

HINT:
If the vehicle ahead in the same lane significantly decreases its speed or another vehicle moves in front of your vehicle, adequate deceleration cannot be applied and the vehicle-to-vehicle distance will shorten. At this time, the system sounds the buzzer and the master warning light blinks to inform the driver. This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system are output.


WIRING DIAGRAM

Refer to the skid control buzzer circuit (Click here).

INSPECTION PROCEDURE

Refer to the skid control buzzer circuit (Click here).