DTC P1570 Radar Sensor Malfunction |
DTC P1572 Improper Aiming of Radar Sensor Beam Axis |
| DTC No. | DTC Detection Condition | Trouble Area |
| P1570 | The ECM detects a laser radar sensor malfunction signal for 0.15 seconds or more while the dynamic laser cruise control is in operation | Laser radar sensor |
| P1572 | The ECU detects that the laser radar sensor beam axis is in an incorrect position (0.15 seconds or more) while the dynamic laser cruise control is in operation | Laser radar sensor |
| 1.ADJUST LASER RADAR SENSOR |
Adjust laser radar sensor (Click here).
| NEXT | |
| 2.CLEAR DTC |
Clear the DTC (Click here).
| NEXT | |
| 3.CHECK FOR DTC |
Reproduce the DTC detection conditions under which the DTC is stored.
Drive the vehicle at a speed of 45 km/h (28 mph) or more and turn the cruise control main switch ON. Push the -SET switch to activate the cruise control system.
Check for DTCs (Click here).
|
| ||||
| OK | ||
| ||