Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM

OCCUPANT CLASSIFICATION SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Turn the ignition switch off.

  2. Connect the Techstream to the DLC3.

  3. Turn the ignition switch to ON and turn the Techstream on.

  4. Enter the following menus: Body / Occupant Detection / Trouble Codes.

    HINT:
    Refer to Techstream operator's manual for further details.


CLEAR DTC
  1. Turn the ignition switch off.

  2. Connect the Techstream to the DLC3.

  3. Turn the ignition switch to ON and turn the Techstream on.

  4. Enter the following menus: Body / Occupant Detection / Trouble Codes.

  5. Clear the DTCs.

    HINT:
    Refer to Techstream operator's manual for further details.