TRANSMISSION WIRE > INSTALLATION |
| 1. INSTALL TRANSMISSION WIRE |
Coat a new O-ring with ATF, and install it to the transmission wire connector.
![]() |
Install the transmission wire with the bolt.
![]() |
Connect the transmission wire connector.
| 2. CONNECT TRANSMISSION WIRE |
![]() |
Connect the 9 solenoid valve connectors.
Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.
Attach the wire harness to the 2 clamps.
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
![]() |
Coat a new O-ring with ATF, and install it to the oil strainer.
Install the oil strainer with the 4 bolts.
| 4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY |
![]() |
Install a new gasket and the oil pan with the 20 bolts.
| 5. ADD AUTOMATIC TRANSMISSION FLUID |
Add automatic transmission fluid (Click here).