Home › Audio/Visual/Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CELLULAR PHONE
  1. Check if the voice on the other side can be heard using the cellular phone.

    OK:
    Voice can be heard.



NG
CELLULAR PHONE IS FAULTY
OK


2.CHECK AUDIO AND VISUAL SYSTEM
  1. Check that audio sound can be heard from the driver side speaker.

    OK:
    Audio sound can be heard.

    HINT:
    If audio sound cannot be heard, proceed to "No sound can be heard from speakers. (Audio is mute.)" in Problem Symptoms Table (Click here).



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK


3.CHECK SETTINGS
  1. Check that the received voice level setting on the cellular phone is not too low.

    OK:
    The received voice level setting is not too low.



NG
TURN VOLUME UP
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)