CONDENSER FAN > REMOVAL |
| 1. REMOVE SHROUD BLOWER ASSEMBLY |
![]() |
Disconnect the connector and 2 clamps.
Remove the 2 bolts and the shroud blower.
| 2. REMOVE COOLING FAN ASSEMBLY |
![]() |
Remove the 3 screws and cooling fan.
| 3. REMOVE COOLING FAN MOTOR |
![]() |
Detach the 2 clamps.
Remove the 3 screws and the cooling fan motor.
| 4. REMOVE BUSH |
![]() |
Remove the 2 grommets and 2 bushes.