Home › General › MAINTENANCE › ENGINE

ENGINE > GENERAL MAINTENANCE


HINT:
Inspect these items on a cooled down engine.



1. INSPECT DRIVE BELT
Type
See procedures
1UR-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


2. INSPECT SPARK PLUGS
Type
See procedures
1UR-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


3. INSPECT ENGINE OIL
Type
See procedures
1UR-FE
Click here
3UR-FE
Click here


4. REPLACE ENGINE OIL AND OIL FILTER
Type
See procedures
1UR-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


5. INSPECT ENGINE COOLANT
Type
See procedures
1UR-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


6. REPLACE ENGINE COOLANT
Type
See procedures
1UR-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


7. INSPECT EXHAUST PIPES AND MOUNTINGS
  1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.



8. INSPECT AIR CLEANER FILTER
  1. Remove the air cleaner filter.

  1. Visually check that the air cleaner filter is not excessively damaged or oily.

  1. Replace the air cleaner filter with a new one, if necessary.



9. INSPECT BATTERY ELECTROLYTE LEVEL (Except North America)
Type
See procedures
1UR-FE
Click here
3UR-FE
Click here


10. REPLACE FUEL FILTER (Except North America)
Type
See procedures
1UR-FE
Click here
3UR-FE
Click here


11. INSPECT FUEL TANK CAP GASKET
Type
See procedures
1UR-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


12. INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND
  1. Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.