Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH

REAR POWER WINDOW SWITCH > INSPECTION

for Preparation Click here



1. INSPECT REAR POWER WINDOW SWITCH


    B171597E01
  1. Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 (D) - 2 (SD)
      3 (B) - 4 (U)
      UP
      Below 1 Ω
      1 (D) - 2 (SD)
      4 (U) - 5 (SU)
      OFF
      Below 1 Ω
      1 (D) - 3 (B)
      4 (U) - 5 (SU)
      DOWN
      Below 1 Ω

      If the result is not as specified, replace the power window switch.