Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM

POWER STEERING SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK POWER STEERING ECU ASSEMBLY

C214366E03


Text in Illustration 
*a
Component without harness connected
(Power Steering ECU Assembly)
-
-
  1. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    H117-1 (CANH) - H117-2 (CANL)
    GR - W
    CAN communication
    Ignition switch off
    54 to 69 Ω
    H117-3 (GND) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    H117-5 (IG) - H117-3 (GND)
    GR - W-B
    IG power supply
    Ignition switch ON
    11 to 14 V
    H117-7 (SOF+) - H117-8 (SOF-)
    LG - BE
    Power steering solenoid valve signal
    1. Engine idling
    2. Steering wheel turned to right or left
    Pulse generation
    If the result is not as specified, the ECU may have a malfunction.