Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE

REAR BRAKE FLEXIBLE HOSE > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. DRAIN BRAKE FLUID

NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.



3. REMOVE REAR BRAKE TUBE FLEXIBLE HOSE


    C178154
  1. Using a union nut wrench, disconnect the flexible hose tube.

    NOTICE:
    1. Do not bend or damage the brake tube.
    2. Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

  1. Remove the clip.



    C180573
  1. Remove the union bolt and gasket, and then remove the flexible hose from the disc brake cylinder.



    C208573
  1. Remove the bolt and disconnect the flexible hose bracket.



    C208574
  1. Remove the 2 bolts and flexible hose.