FRONT SHOCK ABSORBER > INSTALLATION |
| 1. TEMPORARILY INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING |
Temporarily install the upper side of the shock absorber to the chassis frame with the 4 nuts.
Temporarily install the lower side of the shock absorber to the lower suspension arm with the bolt, washer and nut.
| 2. STABILIZE SUSPENSION |
Lower the vehicle.
Press down on the vehicle several times to stabilize the suspension.
| 3. TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING |
Tighten the nut.
![]() |
Tighten the 4 upper nuts in diametrically opposite pairs.
Check that the first nut that was tightened is at the torque specification.
| 4. INSTALL SUSPENSION CONTROL BRACKET (w/ Air Suspension) |
Install the suspension control bracket with the nut.
| 5. INSTALL ABSORBER CONTROL ACTUATOR (w/ Air Suspension) |
![]() |
Using a hexagon wrench, install the absorber control actuator with the 2 bolts.
![]() |
Connect the absorber control actuator connector.
| 6. INSTALL FRONT WHEEL |