Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER

FRONT SHOCK ABSORBER > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. REMOVE ABSORBER CONTROL ACTUATOR (w/ Air Suspension)


C180587
  1. Disconnect the absorber control actuator connector.



    C180592
  1. Using a hexagon wrench, remove the 2 bolts and the absorber control actuator.



3. REMOVE SUSPENSION CONTROL BRACKET (w/ Air Suspension)


C181282
  1. Remove the nut and the suspension control bracket.



4. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING


C155964
  1. Remove the nut from the shock absorber lower side.

    NOTICE:
    To prevent the shock absorber with coil spring from falling, leave the bolt inserted.



    C155965
  1. Remove the 4 nuts.

  1. Remove the bolt (lower side) and shock absorber with coil spring.