Home › Audio/Visual/Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM

DTC    62-46    Scratched / Reversed Disc

DTC    63-46    Scratched / Reversed Disc

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
62-46
Scratches or dirt is found on the disc surface or the disc is inserted upside down.
  1. Disc
  2. Radio receiver assembly
63-46
Scratches or dirt is found on the disc surface or the disc is inserted upside down.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK THAT DISC IS INSERTED PROPERLY
  1. Check whether or not the disc is inserted upside down.

    OK:
    The disc is properly inserted.



NG
INSPECT DISC PROPERLY
OK


2.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
CHANGE DISC
OK


3.DISC CLEANING


    I100151
  1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.


NEXT


4.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


5.RECHECK FOR DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
Go to step 6
OK

USE SIMULATION METHOD TO CHECK (Click here)  

6.REINSERT DISC PROPERLY
  1. Replace the disc with a normal one.

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END