NAVIGATION SYSTEM (for DVD) > Sound Signal Circuit between Stereo Component Tuner Assembly and Television Display Assembly |

| 1.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT TUNER - TELEVISION DISPLAY) |
![]() |
Disconnect the I40 stereo component tuner assembly connector.
Disconnect the U2 television display assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| I40-10 (FRI+) - U2-28 (R+) | Always | Below 1 Ω |
| I40-9 (FRI-) - U2-29 (R-) | Always | Below 1 Ω |
| I40-8 (FLI+) - U2-30 (L+) | Always | Below 1 Ω |
| I40-7 (FLI-) - U2-31 (L-) | Always | Below 1 Ω |
| I40-10 (FRI+) - Body ground | Always | 10 kΩ or higher |
| I40-9 (FRI-) - Body ground | Always | 10 kΩ or higher |
| I40-8 (FLI+) - Body ground | Always | 10 kΩ or higher |
| I40-7 (FLI-) - Body ground | Always | 10 kΩ or higher |
| U2-27 (SLD9) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||