NAVIGATION SYSTEM (for DVD) > Navigation Voice Circuit |

| 1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER - STEREO COMPONENT AMPLIFIER) |
![]() |
Disconnect the I24 navigation receiver assembly connector.
Disconnect the I17 stereo component amplifier connector.
Measure the resistance according to the value(s) in the table below.
| Tester connection | Condition | Specified condition |
| I24-11 (IVO+) - I17-15 (II1+) | Always | Below 1 Ω |
| I24-12 (IVO-) - I17-14 (II1-) | Always | Below 1 Ω |
| I24-11 (IVO+) - Body ground | Always | 10 kΩ or higher |
| I24-12 (IVO-) - Body ground | Always | 10 kΩ or higher |
| I24-13 (SLD1) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||