POWER BACK DOOR SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZE |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Customize Setting /
Select the setting by referring to the table below.
| Display (Item) | Default | Function | Setting |
| PBD SW Operation | 0.8 s | Function that turns power back door closer switch ON when switch is pushed once or held down for 0.8 sec. | 0.8s / ON |
| PBD Buzzer | ON | This function makes the power back door buzzer sound when power back door is operating | ON/OFF |
| Wireless PBD Operation | 0.8 s | Function that operates power back door when transmitter switch is pressed in specified way | 1 Oper / 2 Oper / 0.8 s / OFF / 1 Motion |