Home › Engine / Hybrid System ยท 1UR-FE › STARTING › IGNITION SWITCH

IGNITION SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION SWITCH ASSEMBLY


    A185679
  1. Attach the 2 claws to install the ignition switch.



    A185678
  1. Connect the ignition switch connector.



2. INSTALL LOWER STEERING COLUMN COVER


C160536
  1. Attach the 2 claws to install the steering column lower cover.



3. CUSTOMIZE INFORMATION (for Power Tilt and Power Telescopic Steering Column)
  1. Connect the Techstream to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the Techstream on.

  1. Enter the following menus: Utility / Customize Setting / Tilt & Telescopic.

  1. Turn the auto away/return function ON.