Home › Engine / Hybrid System ยท 1UR-FE › ENGINE CONTROL › POWER STEERING OIL PRESSURE SWITCH

POWER STEERING OIL PRESSURE SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FAN AND GENERATOR V BELT
  1. Remove the fan and generator V belt .



2. REMOVE FRONT WHEEL


3. REMOVE FRONT FENDER APRON SEAL RH
  1. Remove the 6 clips and fender apron seal.



4. DRAIN POWER STEERING FLUID


5. REMOVE POWER STEERING OIL PRESSURE SWITCH


    A215873
  1. Disconnect the power steering oil pressure switch connector.

  1. Remove the power steering oil pressure switch.

  1. Remove the O-ring.