Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for 4WD)

PROPELLER SHAFT ASSEMBLY (for 4WD) > REMOVAL

for Preparation Click here



1. REMOVE PROPELLER SHAFT HEAT INSULATOR


    C158450
  1. Remove the 2 bolts and propeller shaft heat insulator.



2. REMOVE TRANSFER HEAT INSULATOR


    C158451
  1. Remove the 3 bolts and transfer heat insulator.



3. REMOVE PROPELLER SHAFT ASSEMBLY


    C179258E01
  1. Place matchmarks on the propeller shaft flange and differential flange.

  1. Place matchmarks on the propeller shaft flange and transfer flange.

  1. Remove the 8 nuts and then remove the propeller shaft assembly.