Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

for Preparation Click here


INSPECTION PROCEDURE

NOTICE:
  1. Some satellite radio broadcasts require payment. A contract must be made between a satellite radio service and the user. If the contract expires, it will not be possible to listen to the broadcast.
  2. After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

1.CHECK SATELLITE RADIO
  1. Check the radio condition.
    Result 
    Result
    Proceed to
    Broadcast cannot be selected
    A
    Broadcast can be selected, but selection can notbe memorized
    B



B
Go to step 2
A

REPLACE STEREO COMPONENT TUNER ASSEMBLY (Click here)  

2.CHECK SATELLITE RADIO
  1. Check the number of preset channels.

    OK:
    18 channels have already been preset.



NG
Go to step 3
OK

END (ONLY 18 CHANNELS CAN BE PRESET) 

3.CHECK BATTERY
  1. Check if the battery was replaced.

    OK:
    Battery was not replaced.



NG
Go to step 4
OK

REPLACE STEREO COMPONENT TUNER ASSEMBLY (Click here)  

4.ADD PRESET CHANNEL INTO MEMORY AGAIN
  1. Check if the preset channels that have been cleared can be added into memory again.

    OK:
    Preset channels can be added into memory.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END