AIR CONDITIONING PANEL > INSTALLATION |
| 1. INSTALL GLASS BREAKAGE SENSOR MICROPHONE |
![]() |
Engage the 2 claws to install the glass breakage sensor microphone.
| 2. INSTALL SEAT HEATER SWITCH LH (w/o Climate Control Seat System) |
![]() |
Engage the 2 claws to install the seat heater switch.
| 3. INSTALL SEAT HEATER SWITCH RH (w/o Climate Control Seat System) |
![]() |
Engage the 2 claws to install the seat heater switch.
| 4. INSTALL SEAT HEATER SWITCH LH (w/ Climate Control Seat System) |
![]() |
Engage the 4 claws to install the seat heater switch.
| 5. INSTALL SEAT HEATER SWITCH RH (w/ Climate Control Seat System) |
![]() |
Engage the 4 claws to install the seat heater switch.
| 6. INSTALL STEREO JACK ADAPTER ASSEMBLY |
![]() |
Connect the connector.
![]() |
Engage the 2 claws to install the adapter.
| 7. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
![]() |
Connect the connectors.
Attach the 4 clips and install the panel.
| 8. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
Connect the connectors.
Attach the 4 clips and 2 claws to install the finish panel.
| 9. INSTALL COMBINATION METER ASSEMBLY |
![]() |
Connect the connector and engage the clip and install the combination meter assembly.
![]() |
Install the 4 screws.
| 10. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
Attach the 12 clips to install the finish panel.
Connect the 2 connectors and attach the wire harness clamp.
Attach the 4 claws to install the instrument panel finish panel retainer.
| 11. INSTALL FRONT CONSOLE BOX |
![]() |
Install the front console box with the 5 screws and 2 clips.
Attach the 2 clamps.
| 12. INSTALL REAR CONSOLE BOX ASSEMBLY |
![]() |
Attach the 6 claws to install the rear console box.
Install the 2 screws and 4 bolts.
![]() |
Connect the connectors.
| 13. INSTALL CONSOLE BOX CARPET |
![]() |
Install the console box carpet.
| 14. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Connect the connectors.
Attach the 6 clips to install the console panel.
Install the clip.
| 15. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Attach the 12 clips to install the console panel.
| 16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.
| 17. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
Attach the 2 claws to install the sensor.
Connect the connectors.
Attach the 9 clips and claw to install the finish panel.
Install the 2 <A> bolts.
| 18. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.
engage the 3 claws to install the hood lock lever
| 19. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 7 claws to install the side panel.
| 20. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
| 21. INSTALL COWL SIDE TRIM BOARD LH |
| 22. INSTALL FRONT DOOR SCUFF PLATE LH |