FRONT CONSOLE BOX > INSTALLATION |
| 1. INSTALL FRONT CONSOLE BOX |
![]() |
Install the front console box with the 5 screws and 2 clips.
Attach the 2 clamps.
| 2. INSTALL REAR CONSOLE BOX ASSEMBLY |
![]() |
Attach the 6 claws to install the rear console box.
Install the 2 screws and 4 bolts.
![]() |
Connect the connectors.
| 3. INSTALL CONSOLE BOX CARPET |
![]() |
Install the console box carpet.
| 4. INSTALL REAR CONSOLE BOX POCKET |
![]() |
Install the rear console box pocket.
| 5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Connect the connectors.
Attach the 6 clips to install the console panel.
Install the clip.
| 6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Attach the 12 clips to install the console panel.
| 7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.
| 8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
Attach the 2 claws to install the sensor.
Connect the connectors.
Attach the 9 clips and claw to install the finish panel.
Install the 2 <A> bolts.
| 9. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.
engage the 3 claws to install the hood lock lever
| 10. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 7 claws to install the side panel.
| 11. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
| 12. INSTALL FRONT PILLAR GARNISH LH |
| 13. INSTALL COWL SIDE TRIM BOARD LH |
| 14. INSTALL FRONT DOOR SCUFF PLATE LH |