Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL

AIR CONDITIONING PANEL > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure for both sides.



2. REMOVE COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure for both sides.



3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure for both sides.



4. REMOVE INSTRUMENT SIDE PANEL LH


    B226739
  1. Using a moulding remover, detach the 7 claws and remove the side panel.



5. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B192511
  1. Disengage the 3 claws.

  1. Disconnect the hood lock control cable and remove the hood lock control lever sub-assembly.



6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B229064
  1. Remove the 2 bolts.

  1. Detach the 9 clips and claw.



    B163883
  1. Detach the 2 claws and remove the sensor.

  1. Remove the finish panel and then disconnect the connectors.



7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B161741
  1. Twist the shift lever knob in the direction indicated by the arrow and remove it.



8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


B161742
  1. Detach the 12 clips and remove the console panel.



9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


B222976
  1. Move the shift lever to N.

  1. Remove the clip.

  1. Detach the 6 clips and remove the console panel.

  1. Disconnect the connector



10. REMOVE CONSOLE BOX CARPET


B188222
  1. Remove the console box carpet.



11. REMOVE REAR CONSOLE BOX ASSEMBLY


B188223
  1. Disconnect the connectors.



    B192330
  1. Remove the 4 bolts and 2 screws.

  1. Detach the 6 claws and remove the rear console box.



12. REMOVE FRONT CONSOLE BOX


B222975
  1. Detach the 2 clamps.

  1. Remove the 2 clips.

  1. Remove the 5 screws and the front console box.



13. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B192334
  1. Detach the 4 claws and remove the instrument panel finish panel retainer.



    B192335
  1. Disconnect the 2 connectors and detach the wire harness clamp.

  1. Detach the 12 clips and remove the finish panel.



14. REMOVE COMBINATION METER ASSEMBLY


    E161309
  1. Remove the 4 screws.



    E141678
  1. Disconnect the connector and disengage the clip and remove the combination meter assembly.



15. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B192336
  1. Detach the 4 clips and 2 claws.

  1. Disconnect the connectors and remove the finish panel.



16. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


I104352
  1. Detach the 4 clips and separate the panel.

  1. Disconnect the connectors and remove the panel.



17. REMOVE STEREO JACK ADAPTER ASSEMBLY


B232344
  1. Disengage the 2 claws and remove the stereo jack adapter.



    B232345
  1. Disconnect the connector.



18. REMOVE SEAT HEATER SWITCH LH (w/o Climate Control Seat System)


    B194047
  1. Disengage the 2 claws and remove the seat heater switch.



19. REMOVE SEAT HEATER SWITCH RH (w/o Climate Control Seat System)


    B194047
  1. Disengage the 2 claws and remove the seat heater switch.



20. REMOVE SEAT HEATER SWITCH LH (w/ Climate Control Seat System)


    B194048
  1. Disengage the 4 claws and remove the seat heater switch.



21. REMOVE SEAT HEATER SWITCH RH (w/ Climate Control Seat System)


    B194048
  1. Disengage the 4 claws and remove the seat heater switch.



22. REMOVE GLASS BREAKAGE SENSOR MICROPHONE


B192522
  1. Disengage the 2 claws and remove the glass breakage sensor microphone.