LIGHTING SYSTEM > SYSTEM DESCRIPTION |
| MANUAL LIGHT CONTROL SYSTEM |
This system functions when lights such as the headlight, taillight and front fog light are illuminated by manual operation of the light control switch.
The main body ECU receives the following signals (D).
The main body ECU controls the following signals based on the signals listed in D (E).
The main body ECU controls the on/off operation of the following parts based on the signal listed in E.
| LIGHT AUTO TURN OFF SYSTEM |
When the headlight and taillight are both illuminated by the operation of the light control switch, if the ignition switch is turned off, this system continues illuminating the headlight and taillight for approximately 30 seconds, and then turns them off. However, when all the doors are locked using the door control switch, key or transmitter OFF switch within 30 seconds, this system turns the headlight and taillight off immediately. Also, when only the taillight is illuminated by the operation of the light control switch, if the ignition switch is turned off and the driver door is opened, this system turns the taillight off immediately.
The main body ECU receives the following signals (F).
The main body ECU controls the following signals based on the signals listed in F (G).
The main body ECU controls the on/off operation of the following parts based on the signal listed in G.
| DAYTIME RUNNING LIGHT SYSTEM |
This system is directly connected to the turn signal light and is designed to automatically activate the daytime running lights in order to increase the visibility of the vehicle.
The main body ECU receives the following (H).
The main body ECU and turn signal flasher controls the following signal based on the signals listed in H (I).
The main body ECU and turn signal flasher controls the on/off operation of the following part based on the signal listed in I.