LIGHTING SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH TECHSTREAM |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Customize Setting / illuminated Entry or Light Control.
Select the setting by referring to the table below.
| Display | Default | Content | Setting |
| Lighting Time | 15s | Changes illumination duration after door closure (It will quickly fade out when turning ignition switch ON) | 7.5s/15s/30s |
| I/L when ACC OFF | ON | Illuminates light when ignition switch turned to ACC → OFF (Room light illuminated when interior light switch set to DOOR) | ON/OFF |
| I/L ON W/Door Key Unlock | ON | Function to light up room light when unlocking with door key cylinder (Room light illuminated when interior light switch set to DOOR) | ON/OFF |
| Display | Default | Content | Setting |
| Disp Ex ON Sen | NORMAL | Function to change level of ambient light at which system dims lights such as combination meter indicator light, A/C indicator light and clock light*1 | Light2/Light1/Normal/Dark1/Dark2 |
| Disp Ex OFF Sen | NORMAL | Function to change level of ambient light at which system cancels dimming of lights such as combination meter indicator light, A/C indicator light and clock light*2 | Light2/Light1/Normal/Dark1/Dark2 |
| Sensitivity | NORMAL | Function to adjust ambient light sensitivity of automatic light control system*3 | Light2/Light1/Normal/Dark1/Dark2 |
| System Setting | ![]() | ||||
| Setting | Dark2 | Dark1 | Normal | Light1 | Light2 |
| System Setting | ![]() | ||||
| Setting | Dark2 | Dark1 | Normal | Light1 | Light2 |
| System Setting | ![]() | ||||
| Setting | Dark2 | Dark1 | Normal | Light1 | Light2 |