SEAT MEMORY SWITCH > INSTALLATION |
| 1. INSTALL SEAT MEMORY SWITCH |
![]() |
Install the seat memory switch with the 2 screws.
| 2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
Connect the connectors.
![]() |
Connect the front door lock remote control cable and the front door inside locking cable.
![]() |
Engage the 10 clips and install the front door trim board sub-assembly.
![]() |
Tighten the 2 screws.
Install the front door armrest cover.
| 3. INSTALL FRONT ARMREST BASE UPPER PANEL LH |
![]() |
Connect the connector.
Engage the 2 clips and 5 claws and install the front armrest base upper panel.
| 4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH |
![]() |
Engage the 4 claws and install the front door inside handle bezel plug
| 5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH |
![]() |
Connect the connector.
Engage the 3 clips and install the front door lower frame bracket garnish.