Home › Vehicle Interior › SEAT › POWER SEAT SWITCH (for Front Seat)

POWER SEAT SWITCH (for Front Seat) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the LH side and RH side.
  2. The procedure listed below is for the LH side.



1. INSTALL FRONT POWER SEAT SWITCH LH (w/o Memory)


    B194038
  1. Install the front power seat switch with the 3 screws.

  1. Connect the connector.



2. INSTALL LEG SUPPORT ADJUSTMENT SWITCH (w/ Leg Support Adjustment Switch)


    B191014
  1. Connect the connector.

  1. Install the leg support adjustment switch with the 2 screws.

  1. Engage the 2 wire harness clamps.



3. INSTALL FRONT POWER SEAT LUMBAR SWITCH (for Power Seat)


    B201589
  1. Install the front power seat lumbar switch with the 2 screws.

  1. Connect the connector.



4. INSTALL FRONT POWER SEAT LUMBAR SWITCH (for Manual Seat)


    B194037
  1. Install the front power seat lumbar switch with the 2 screws.

  1. Connect the connector.



5. INSTALL FRONT SEAT CUSHION SHIELD LH (for Power Seat)


    B166945
  1. Connect the switch connectors.

  1. Attach the 2 claws to install the cushion shield.

  1. Install the 3 screws.



    B195226E01
  1. Install the 2 screws.

  1. Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with 2 new hog rings.



6. INSTALL FRONT SEAT CUSHION SHIELD LH (for Manual Seat)


    B191001E01
  1. Connect the connector and install the harness to the front seat cushion shield.

  1. Engage the 3 claws in the order shown in the illustration, and install the front seat cushion shield.

  1. Install the 3 screws.



    B191002E01
  1. Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with 2 new hog rings.



7. INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat)


B201574
  1. Attach the 2 claws to install the knob.



8. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)


B201575
  1. Attach the 2 claws to install the knob.



9. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat)


    B194817
  1. Engage the claw to install the reclining adjuster release handle.



10. INSTALL VERTICAL SEAT ADJUSTER KNOB (for Manual Seat)


    B191003
  1. Install the snap ring to the vertical seat adjuster knob.

  1. Install the vertical seat adjuster knob to the front seat.



11. INSTALL VERTICAL ADJUSTING HANDLE LH (for Manual Seat)


    B190970
  1. Install the vertical adjusting handle with the 2 screws.



12. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat)


    B200259
  1. Engage the 2 claws to install the vertical adjuster handle cap.



13. INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat)
  1. Install the front seat (Click here).



14. INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat)
  1. Install the front seat (Click here).