FRONT SEATBACK HEATER > INSTALLATION |
| 1. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH |
![]() |
Set the seatback heater with the name stamp side facing the seatback cover.
Install the seatback heater with new 9 tack pins.
| 2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Using hog ring pliers, install the seatback cover to the seatback pad with 2 new hog rings.
![]() |
Connect the seatback cover bracket to the seatback pad.
![]() |
Install the seatback cover wires.
Using hog ring pliers, install 2 new hog rings to the seatback pad.
| 3. INSTALL SEATBACK COVER WITH PAD |
![]() |
Install the seatback cover with pad to the seatback frame.
Lift the seatback cover and, using hog ring pliers, install 4 new hog rings to the seat frame.
Lift the seatback cover, attach the seatback cover bracket to the seat frame, and install the nut.
![]() |
Install the seatback cover wires.
Using hog ring pliers, install 2 new hog rings to the seat frame.
![]() |
Attach the 3 hooks.
![]() |
Using hog ring pliers, install 3 new hog rings to the seat frame.
| 4. INSTALL FRONT SEAT HEADREST SUPPORT |
![]() |
Align the protruding portion of the front seat headrest supports with the installation grooves of the front seatback frame.
Attach the 4 claws to install the 2 headrest supports.
| 5. INSTALL FRONT SEAT CUSHION SHIELD INNER LH |
![]() |
Attach the 2 claws and clip to install the cushion shield.
Install the screw.
| 6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH |
![]() |
Install the front seat inner belt LH with the nut.
![]() |
Connect the connector and engage the 5 clamps.
| 7. INSTALL FRONT SEAT CUSHION SHIELD LH |
![]() |
Connect the switch connectors.
Attach the 2 claws to install the cushion shield.
Install the 3 screws.
![]() |
Install the 2 screws.
Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with 2 new hog rings.
| 8. INSTALL RECLINING POWER SEAT SWITCH KNOB LH |
![]() |
Attach the 2 claws to install the knob.
| 9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH |
![]() |
Attach the 2 claws to install the knob.
| 10. INSTALL FRONT SEAT ASSEMBLY LH |
Install the front seat (Click here).