Home › Vehicle Interior › SEAT › REAR SEAT CUSHION HEATER

REAR SEAT CUSHION HEATER > INSPECTION

for Preparation Click here



1. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY LH


B200252E01
  1. Heat the thermostat with a light.

  1. Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Thermostat temperature 25°C (77°F)
      Below 1 Ω
      1 - 5
      Seat cushion heater temperature 20°C (68°F)
      3.0 to 3.6 Ω
      3 - 4
      Seat cushion heater temperature 15°C to 30°C (59°F to 86°F)
      8.2 to 14.9 kΩ

      If the result is not as specified, replace the seat cushion heater.



2. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY RH


B200252E01
  1. Heat the thermostat with a light.

  1. Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Thermostat temperature 25°C (77°F)
      Below 1 Ω
      1 - 5
      Seat cushion heater temperature 20°C (68°F)
      3.0 to 3.6 Ω
      3 - 4
      Seat cushion heater temperature 15°C to 30°C (59°F to 86°F)
      8.2 to 14.9 kΩ

      If the result is not as specified, replace the seat cushion heater.