Home › Vehicle Interior › SEAT › REAR SEATBACK HEATER

REAR SEATBACK HEATER > INSPECTION

for Preparation Click here



1. INSPECT REAR SEATBACK HEATER ASSEMBLY LH


B200253E01
  1. Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A1 - B5
      Always
      Below 1 Ω
      A2 - B4
      Always
      Below 1 Ω
      A3 - B3
      Always
      Below 1 Ω
      A4 - B2
      Always
      Below 1 Ω
      A1 - B1
      Seatback heater temperature 20°C (68°F)
      4.9 to 5.9 Ω

      If the result is not as specified, replace the seatback heater.



2. INSPECT REAR SEATBACK HEATER ASSEMBLY RH


B200253E01
  1. Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A1 - B5
      Always
      Below 1 Ω
      A2 - B4
      Always
      Below 1 Ω
      A3 - B3
      Always
      Below 1 Ω
      A4 - B2
      Always
      Below 1 Ω
      A1 - B1
      Seatback heater temperature 20°C (68°F)
      4.9 to 5.9 Ω

      If the result is not as specified, replace the seatback heater.