Home › Drivetrain ยท A760E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > DISASSEMBLY

for Preparation Click here



1. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY


    C158363E01
  1. Using a thin-bladed screwdriver, release the connector housing retainer.

  1. Using a thin-bladed screwdriver, push out terminals 4 (ILL+) and 8 (ILL-) from the rear as shown in the illustration.



    C179209
  1. Rotate the indicator light wire counterclockwise to align the wire with the key part of the transmission floor shift assembly and remove the wire.



2. REMOVE POSITION INDICATOR HOUSING ASSEMBLY


    C179211
  1. Disengage the 4 claws and remove the position indicator housing.



3. REMOVE POSITION INDICATOR SLIDE COVER


    C179212
  1. Remove the position indicator slide cover with No. 2 position indicator slide cover.



4. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER


    C179213
  1. Remove the No. 2 position indicator slide cover from the position indicator slide cover.



5. REMOVE SHIFT LOCK RELEASE BUTTON


    C179214
  1. Disengage the 2 claws and remove the shift lock release button and shift lock release spring.



6. REMOVE LOWER POSITION INDICATOR HOUSING


    C179215
  1. Using a small screwdriver, disengage the 6 claws and remove the lower position indicator housing.



7. REMOVE SHIFT LOCK CONTROL ECU


    C179217
  1. Disconnect the shift lock solenoid connector.

  1. Disengage the 3 claws and remove the shift lock control ECU.