SHIFT LEVER > DISASSEMBLY |
| 1. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY |
![]() |
Using a thin-bladed screwdriver, release the connector housing retainer.
Using a thin-bladed screwdriver, pull out the 4 (ILL+) and 8 (ILL-) terminals from the rear as shown in the illustration.
![]() |
Rotate the indicator light wire counterclockwise to align the key part and remove the wire.
| 2. REMOVE POSITION INDICATOR HOUSING ASSEMBLY |
![]() |
Disengage the 4 claws and remove the position indicator housing.
| 3. REMOVE POSITION INDICATOR SLIDE COVER |
![]() |
Remove the position indicator slide cover with No. 2 position indicator slide cover.
| 4. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER |
![]() |
Remove the No. 2 position indicator slide cover from the position indicator slide cover.
| 5. REMOVE SHIFT LOCK RELEASE BUTTON |
![]() |
Disengage the 2 claws and remove the shift lock release button and shift lock release spring.
| 6. REMOVE LOWER POSITION INDICATOR HOUSING |
![]() |
Using a small screwdriver, disengage the 6 claws and remove the lower position indicator housing.
| 7. REMOVE SHIFT LOCK CONTROL ECU |
![]() |
Disconnect the shift lock solenoid connector.
Disengage the 3 claws and remove the shift lock control ECU.