Home › Engine / Hybrid System · 3UR-FBE › FUEL › FUEL SENDER GAUGE ASSEMBLY

FUEL SENDER GAUGE ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FUEL SENDER GAUGE ASSEMBLY


A194630E01
  1. Check that the float moves smoothly between F and E.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 - 4
    Float level is F (upper)
    111 to 119 Ω
    Float level is E (lower)
    506 to 514 Ω

    If the result is not as specified, replace the fuel sender gauge assembly.