Home › Vehicle Interior › LIGHTING (INT) › GLOVE BOX LIGHT

GLOVE BOX LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL GLOVE BOX LIGHT ASSEMBLY


    E186696
  1. Turn the light in the direction indicated by the arrow to install it.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH
  1. Connect the connector.

  1. Attach the 3 claws to install the finish panel.

  1. Install the 3 <D> screws and bolt <A>.



3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
  1. Install the lower No. 2 instrument panel airbag assembly (Click here).