Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM

AIR CONDITIONING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

HINT:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Customize Setting / Air Conditioner.

  5. Select the setting by referring to the table below.

    Air Conditioner 
    Display
    Default
    Content
    Setting
    Set Temperature Shift
    Normal
    Function to control the shifted temperature in relation to the displayed temperature
    +2 C / +1 C / Normal / -1 C / -2 C
    Compressor/Air Inlet DEF Operation
    Link
    Function to turn the A/C ON automatically linked with the FRONT DEF button when A/C is OFF
    Normal/Link
    Air Inlet Mode
    Automatic
    In case of turning the A/C ON to cool down the cabin quickly, this is the function to change the mode automatically to RECIRCULATION mode
    Manual/Automatic
    Foot/DEF Autotic Blow Up Function
    ON
    Function to change the blower level automatically when the defroster is ON
    OFF/ON
    Ambient Temperature Shift
    Normal
    Function to control the shifted ambient temperature in relation to the displayed ambient temperature
    +3 C / +2 C / +1 C / Normal / -1 C / -2 C / -3 C