Home › Audio/Visual/Telematics › AUDIO / VIDEO › STEREO JACK ADAPTER ASSEMBLY

STEREO JACK ADAPTER ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B161741
  1. Twist the shift lever knob in the direction indicated by the arrow and remove it.



2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


B161742
  1. Detach the 12 clips and remove the console panel.



3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


B222976
  1. Move the shift lever to N.

  1. Remove the clip.

  1. Detach the 6 clips and remove the console panel.

  1. Disconnect the connector



4. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B192336
  1. Detach the 4 clips and 2 claws.

  1. Disconnect the connectors and remove the finish panel.



5. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


B232344
  1. Disengage the 2 claws and remove the stereo jack adapter.



    B232345
  1. Disconnect the connector.