FRONT AXLE HUB BOLT > REPLACEMENT |
| 1. REMOVE FRONT WHEEL |
| 2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH |
![]() |
Remove the bolt and disconnect the brake tube bracket from the steering knuckle.
![]() |
Remove the 2 bolts and disconnect the disc brake caliper from the steering knuckle.
| 3. REMOVE FRONT DISC |
![]() |
Put matchmarks on the front disc and axle hub if planning to reuse the disc.
Remove the front disc.
| 4. REMOVE FRONT AXLE LH HUB BOLT |
![]() |
Using SST and a screwdriver or equivalent to hold the axle hub, remove the front axle hub bolt.
| 5. INSTALL FRONT AXLE LH HUB BOLT |
![]() |
Temporarily install a washer and hub nut to a new hub bolt as shown in the illustration.
Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.
Remove the washer and hub nut.
| 6. INSTALL FRONT DISC |
![]() |
Align the matchmarks, and then install the front disc.
| 7. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH |
![]() |
Connect the front disc brake caliper and install 2 new bolts.
![]() |
Connect the brake tube bracket to the steering knuckle with the bolt.
| 8. INSTALL FRONT WHEEL |