4WD CONTROL ECU > INSTALLATION |
| 1. INSTALL 4WD CONTROL ECU |
![]() |
Install the ECU with the bolt.
Connect the 2 ECU connectors.
| 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH |
Attach the 2 claws to install the sensor.
Connect the connectors.
Attach the 9 clips and claw to install the finish panel.
Install the 2 <A> bolts.
| 3. INSTALL INSTRUMENT SIDE PANEL RH |
Attach the 2 claws to install the sensor.
Connect the connectors.
Attach the 9 clips and claw to install the finish panel.
Install the 2 <A> bolts.
| 4. INSTALL COWL SIDE TRIM BOARD RH |
Install the cowl side trim board RH .
| 5. INSTALL FRONT DOOR SCUFF PLATE RH |
Install the front door scuff plate RH .