Home › Engine / Hybrid System ยท 1UR-FE › EMISSION CONTROL › AIR SWITCHING VALVE (for Bank 1)

AIR SWITCHING VALVE (for Bank 1) > REMOVAL

for Preparation Click here



1. DISCONNECT NO. 2 AIR HOSE


    A214261
  1. Disconnect the No. 2 air hose and connector.



2. REMOVE AIR SWITCHING VALVE ASSEMBLY


    A214260
  1. Remove the bolt and disconnect the wire harness clamp bracket.



    A214262
  1. Remove the 2 bolts.



    A214263
  1. Remove the 3 bolts, air switching valve and gasket.

    NOTICE:
    Be careful not to damage the installation surface of the gaskets.