AIR PUMP > REMOVAL |
| 1. SEPARATE FRONT FENDER LINER RH |
![]() |
Remove the 8 clips, separate the fender liner.
| 2. SEPARATE FRONT FENDER APRON SEAL RH |
![]() |
Using a clip remover, separate the 2 clips and fold back the fender apron seal.
| 3. REMOVE NO. 2 AIR INJECTION SYSTEM HOSE |
![]() |
Engine Room Side:
Disconnect the 2 clamps.
Disconnect the No. 2 air injection system hose.
Using a clip remover, remove the clamp from the body panel.
Front Fender RH Inside:
Disconnect the clamp.
Disconnect the No. 2 air injection system hose from the air pump.
| 4. REMOVE NO. 3 AIR INJECTION SYSTEM HOSE |
![]() |
Engine Room Side:
Disconnect the clamp and No. 3 air injection system hose.
Using a clip remover, remove the clamp from the body panel.
Front Fender RH Inside:
Disconnect the No. 3 air injection system hose from the air pump.
Using a clip remover, remove the clamp from the body panel.
| 5. REMOVE AIR PUMP ASSEMBLY WITH BRACKET |
![]() |
Disconnect the 2 air pump connectors and detach the 3 wire harness claws.
![]() |
Remove the 2 bolts, 2 nuts and air pump.
| 6. REMOVE AIR PUMP INLET |
![]() |
Remove the 2 bolts and air pump inlet.
| 7. DISCONNECT NO. 1 AIR INJECTION SYSTEM HOSE |
Disconnect the 2 No. 1 air injection system hoses.
| 8. REMOVE AIR PUMP ASSEMBLY |
![]() |
Using a clip remover, detach the 2 clamps and remove the air pump from the bracket.
Disconnect the 6 air pump insulators.