Home › Engine / Hybrid System ยท 1UR-FE › ENGINE CONTROL › ACCELERATOR PEDAL

ACCELERATOR PEDAL > INSTALLATION

for Preparation Click here



1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY

NOTICE:
  1. Avoid physical shocks to the accelerator pedal rod assembly.
  2. Do not disassemble the accelerator pedal rod assembly.



    A153493
  1. Install the accelerator pedal rod with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the accelerator pedal position sensor connector.