REAR CENTER SEAT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE REAR SEAT CUSHION HINGE COVER UPPER LH |
![]() |
Detach the hook.
Remove the screw.
Detach the 2 claws and remove the rear seat cushion hinge cover.
| 2. REMOVE REAR SEAT CUSHION HINGE COVER UPPER RH |
![]() |
Detach the hook.
Remove the screw.
Detach the 2 claws and remove the rear seat cushion hinge cover.
| 3. REMOVE CENTER SEAT CUSHION ASSEMBLY |
![]() |
Detach the hook and loop fastener and hook.
![]() |
Remove the 2 bolts.
Using a T45 "TORX" socket, remove the 2 "TORX" bolts and 2 bushes. Then remove the center seat cushion assembly.
| 4. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY |
![]() |
Detach the hooks and remove the rear seat cushion spring assembly.
| 5. REMOVE CENTER SEAT CUSHION COVER SUB-ASSEMBLY |
![]() |
Remove the 7 hog rings and seat cushion cover from the seat cushion pad.
| 6. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY |
| 7. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY |
![]() |
Detach the 6 clips and remove the rear seatback board sub-assembly.
| 8. REMOVE CENTER SEAT HINGE COVER LH |
![]() |
Remove the screw.
Detach the 3 claws and clip and remove the center seat hinge cover.
| 9. REMOVE CENTER SEAT HINGE COVER RH |
![]() |
Remove the screw.
Detach the 3 claws and clip and remove the center seat hinge cover.
| 10. REMOVE REAR SEAT CUSHION UNDER COVER |
![]() |
Remove the 2 screws and rear seat cushion under cover.
| 11. REMOVE CENTER SEAT INNER BELT ASSEMBLY |
![]() |
Remove the bolt and center seat inner belt assembly.
| 12. REMOVE REAR SEAT SHOULDER BELT HOLE COVER NO. 1 |
![]() |
Detach the 4 claws and remove the rear seat shoulder hole cover No. 1.
| 13. REMOVE REAR SEATBACK LOCK BEZEL UPPER |
![]() |
Remove the center seat outer belt lower bolt.
![]() |
Remove the 2 screws and rear seatback lock bezel upper.
| 14. REMOVE REAR SEAT SHOULDER BELT HOLE COVER NO. 2 |
![]() |
Using a T30 "TORX" socket, remove the 2 "TORX" bolts and rear seat shoulder belt hole cover No. 2.
| 15. REMOVE REAR SEATBACK LOCK STRIKER COVER |
![]() |
Using a screwdriver, detach the claw and guide and remove the rear seatback lock striker cover.
| 16. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH |
![]() |
Remove the 2 screws.
Disconnect the cable and remove the rear seat lock control lever sub-assembly.
| 17. REMOVE REAR SEAT HEADREST SUPPORT |
![]() |
Detach the 4 claws and remove the 2 rear seat headrest supports.
| 18. REMOVE REAR SEAT SHOULDER BELT HOLE COVER NO. 3 |
![]() |
Remove the 2 screws.
Detach the 2 claws and remove the rear seat shoulder belt hole cover No. 3.
| 19. REMOVE ARMREST ASSEMBLY |
![]() |
Remove the 2 nuts and armrest assembly.
| 20. REMOVE CENTER ARMREST HINGE COVER LH |
![]() |
Remove the screw, slide the center armrest hinge cover LH forward to remove it, as shown in the illustration.
| 21. REMOVE CENTER ARMREST HINGE COVER RH |
![]() |
Remove the screw, slide the center armrest hinge cover RH forward to remove it, as shown in the illustration.
| 22. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH |
![]() |
Remove the bolt and rear seatback hinge sub-assembly LH.
| 23. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH |
![]() |
Remove the bolt and rear seatback hinge sub-assembly RH.
| 24. REMOVE SEATBACK COVER WITH PAD |
![]() |
Remove the 5 hog rings.
![]() |
Remove the 6 hog rings.
![]() |
Detach the hooks.
![]() |
Detach the hooks and remove the seatback cover with pad.
| 25. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY |
![]() |
Remove the center seatback cover from the center seatback pad.
| 26. REMOVE CENTER SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the cable tie.
Remove the 4 nuts and center seat outer belt assembly.
| 27. REMOVE CENTER SEAT HINGE COVER UPPER LH |
![]() |
Remove the screw.
Detach the 2 claws and remove the center seat hinge cover upper.
| 28. REMOVE CENTER SEAT HINGE COVER |
![]() |
Remove the screw.
Detach the 2 claws and remove the cover.
| 29. REMOVE CENTER SEATBACK FRAME SUB-ASSEMBLY |
![]() |
Remove the 2 bolts.
Using a T55 "TORX" socket, remove the 2 "TORX" bolts and center seatback frame sub-assembly.
| 30. REMOVE REAR SEAT RECLINING CONTROL CABLE |
![]() |
Detach the 2 clamps.
Rotate the cable ends and remove the rear seat reclining control cable.
Pull the cable through the center seatback frame sub-assembly.
| 31. REMOVE REAR NO. 1 SEAT ADJUSTER SUB-ASSEMBLY |
![]() |
Remove the 3 nuts and rear No. 1 seat adjuster sub-assembly.
| 32. REMOVE REAR NO. 1 SEAT ADJUSTER ASSEMBLY |
![]() |
Remove the 3 nuts and rear No. 1 seat adjuster assembly.
| 33. REMOVE REAR SEAT TRACK ADJUSTING HANDLE |
![]() |
Slide the slide rail to the rearmost position.
Using a small screwdriver, push down the handle stopper to detach the claw and remove the adjusting handle.
| 34. REMOVE REAR SEAT BRACKET |
![]() |
Remove the 2 nuts and rear seat bracket.