Home › Audio/Visual/Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER

REAR DOOR SPEAKER > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 14 Speakers)


    B191807
  1. Engage the 3 claws to install the speaker to the door trim board.



2. INSTALL REAR NO. 1 SPEAKER ASSEMBLY


    E161077
  1. Engage the 2 claws.



    E161073
  1. Install the speaker with the 3 screws.

    NOTICE:
    Do not touch the cone part of the speaker.

  1. Connect the connector.



3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY RH


    B190580
  1. Connect the rear door lock remote control cable and the rear door inside locking cable.

  1. Connect the connector.



    B190579
  1. Engage the 9 clips and install the rear door trim board sub-assembly.



    B190578
  1. Tighten the 2 screws.

  1. Install the rear door armrest cover.



4. INSTALL REAR UPPER DOOR ARMREST BASE PANEL RH
  1. Connect the connector.



    B190574
  1. Engage the 2 clips and 5 claws and install the rear door armrest base upper panel.



5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG RH


B190576
  1. Engage the 4 claws and install the rear door inside handle bezel plug.



6. INSTALL REAR DOOR FRAME GARNISH RH


    B190577
  1. Engage the 6 clips and install the rear door frame garnish.