Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET

POWER OUTLET SOCKET > REMOVAL

for Preparation Click here



1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B161741
  1. Twist the shift lever knob in the direction indicated by the arrow and remove it.



2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


B161742
  1. Detach the 12 clips and remove the console panel.



3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


B222976
  1. Move the shift lever to N.

  1. Remove the clip.

  1. Detach the 6 clips and remove the console panel.

  1. Disconnect the connector



4. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B192336
  1. Detach the 4 clips and 2 claws.

  1. Disconnect the connectors and remove the finish panel.



5. REMOVE POWER OUTLET SOCKET ASSEMBLY


    E162355E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the power outlet socket assembly.



6. REMOVE POWER OUTLET SOCKET COVER


    E162357
  1. Disengage the 2 claws and remove the power outlet socket cover.