Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY


    E161331
  1. Remove the 3 screws and headlight washer actuator sub-assembly LH.



2. REMOVE CLEARANCE LIGHT BULB


    E142782
  1. Turn the clearance light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the clearance light bulb from the light socket.



3. REMOVE NO. 2 HEADLIGHT BULB


    E142783
  1. Turn the No. 2 headlight bulb, in the direction indicated by the arrow in the illustration, to remove it.

    NOTICE:
    Do not touch the bulb glass with your fingers.



4. REMOVE FRONT TURN SIGNAL LIGHT BULB


    E142784
  1. Turn the front turn signal light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the front turn signal light bulb from the light socket.



5. REMOVE NO. 1 HEADLIGHT BULB


    E142785
  1. Turn the No. 1 headlight bulb , in the direction indicated by the arrow in the illustration, to remove it.

    NOTICE:
    Do not touch the bulb glass with your fingers.